Multi Function Granules
£11.99
Multi-function chlorine granules, a premium sanitiser with added algicide and flocculant (clarifier), for swimming pool and spa water. To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6
Description
Multi-Function Granules for disinfecting Hot Tub, Spa, and Pool water
Additional information
| Weight | 1.2 kg |
|---|
Contents
Contains Sodium EC220-767-7 Dichloroisocyanurate Dihydrate
Instructions for use
- Test to check the chemical balance
- To increase your chlorine level by 1ppm or mg/litre add;
- 2 grams per 1000 litres (220 gallons)
- 10 grams per 5000 litres (1100 gallons)
- 20 grams per 10,000 litres (2200 gallons)
- 120 grams per 60,000 litres (13,200 gallons)
- Fill a clean plastic bucket with water, add the required dose of stabilised chlorine granules to a maximum of 100 grams per 10 litres of water and mix well.
- ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS
- Add the solution to your pool or spa near the water inlet with pump running.
- Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary.
Product Warning
- Harmful if swallowed. Causes serious eye irritation.
- May cause respiratory irritation.
- Very toxic to aquatic life with long lasting effects.
- Do not breathe dust. Keep away from acids.
- Wear protective gloves.
- Avoid release to the environment.
- Do not eat, drink or smoke when using this product.
- IF IN EYES: Rinse cautiously with water for several
- minutes. Remove contact lenses, if present and easy to do.
- Continue rinsing.
- Warning! Do not use together with other products.
- May release dangerous gases (chlorine).
- Contact with acids liberates toxic gas.
- Keep out of reach of children.
- If medical advice is needed, have product container or label at hand.
Related products
AquaFinesse Hot Tub and Spa Deep Clean Tablet
£89.95
Reviews
There are no reviews yet.