pH Increaser
£7.99
To prevent or cure the problems caused by low pH, such as ineffective chlorination and scaling of pool structure. To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6.
Description
pH increaser for raising pH of pool water.
Additional information
| Weight | 1.2 kg |
|---|
Contents
Contains Sodium Carbonate EC207-838-8
Instructions for use
- Test to check the chemical balance.
- To increase the pH add:
- 10 grams per 1000 litres (220 gallons)
- 50 grams per 5000 litres (1100 gallons)
- 100 grams per 10,000 litres (2200 gallons)
- 600 grams per 60,000 litres (13,200 gallons)
- Fill a clean plastic bucket with water, add the required dose of pH increaser and mix well.
- ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS
- Add the solution to your pool or spa near the water inlet with pump running.
- Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary.
Product Warning
- Causes serious eye irritation
- If medical advice is needed, have product container or label at hand
- Keep out of reach of children
- Do not breathe dust
- IF IN EYES: Rinse cautiously with water for several minutes.
- Remove contact lenses, if present and easy to do.
- Continue rinsing.
Related products
AquaFinesse Hot Tub and Spa Deep Clean Tablet
£89.95
Reviews
There are no reviews yet.