pH Reducer
£7.99
To prevent or cure the problems caused by high pH, cloudy water, stinging eyes, ineffective chlorination, clogging of filters and scaling of pool structure. To ensure safe use of your pool or spa, maintain a free chlorine level of between 1-3 ppm for pools or 3-5 ppm for spas and a pH level of between 7.2 and 7.6.
Description
pH reducer for lowering pH of pool water.
Additional information
| Weight | 1.2 kg |
|---|
Contents
Contains Sodium EC231-665-7 Hydrogen Sulphate
Instructions for use
- Test to check the chemical balance.
- To reduce the pH add:
- 10 grams per 1000 litres (220 gallons)
- 50 grams per 5000 litres (1100 gallons)
- 100 grams per 10,000 litres (2200 gallons)
- 600 grams per 60,000 litres (13,200 gallons)
- Fill a clean plastic bucket with water, add the required dose of pH reducer and mix well.
- ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS
- Add the solution to your pool or spa near the water inlet with pump running.
- Allow the chemicals to circulate for 2-3 hours then retest and repeat as necessary.
Product Warning
- Causes serious eye damage
- Wear protective gloves/protective clothing/eye protection/
- face protection
- IF IN EYES: Rinse cautiously with water for several minutes.
- Remove contact lenses, if present and easy to do.
- Continue rinsing.
- Immediately call a POISON CENTER or doctor/physician.
- Keep out of reach of children
- If medical advice is needed, have product container or
- label at hand.
Related products
AquaFinesse Hot Tub and Spa Deep Clean Tablet
£89.95
Reviews
There are no reviews yet.